Technical & Safety Data

[tabs]
[tab title=”Technical Specifications”]

_

[column]
[threecol_one]

SUITABLE SUBSTRATES

[/threecol_one]
[threecol_two_last]

Brass, aluminium, stainless steel, raw iron, zinc, brazing solder, etc. (Does not react with plastics, rubber, glass, varnishes, ceramics and fabrics).

[/threecol_two_last]
[/column]

[column]
[threecol_one]

PREPARATION

[/threecol_one]
[threecol_two_last]

Preparation of highly refined mineral oils, complexing agents, inhibitors and additives, corrosion protection additives, anti-oxidants, metal deactivators as well as paraffinic and naphthalene hydrocarbons. Free from polycyclic hydrocarbons, fluorinated or chlorinated hydrocarbons, resins, silicones, teflon and aromatic compounds.

[/threecol_two_last]
[/column]

[column]
[threecol_one]

FORM

[/threecol_one]
[threecol_two_last]

liquid

[/threecol_two_last]
[/column]

[column]
[threecol_one]

COLOUR

[/threecol_one]
[threecol_two_last]

green

[/threecol_two_last]
[/column]

[column]
[threecol_one]

IGNITION POINT

[/threecol_one]
[threecol_two_last]

> 250°C

[/threecol_two_last]
[/column]

[column]
[threecol_one]

EXPLOSION LIMITS

[/threecol_one]
[threecol_two_last]

lower: 0.6 Vol.-%

upper: ~10.9 Vol.-%

[/threecol_two_last]
[/column]

[column]
[threecol_one]

SOLUBILITY IN WATER

[/threecol_one]
[threecol_two_last]

Not soluble, not emulsifying.

[/threecol_two_last]
[/column]

[column]
[threecol_one]

DENSITY

[/threecol_one]
[threecol_two_last]

0.6 g/ml at 20°C (extremely high penetrability).

[/threecol_two_last]
[/column]

[column]
[threecol_one]

DURABILITY

[/threecol_one]
[threecol_two_last]

1 Year + (Depending on the mechanical strain)

[/threecol_two_last]
[/column]

[column]
[threecol_one]

TEMPERATURE RESISTANCE

[/threecol_one]
[threecol_two_last]

Fully functional between -20 and +130°C.

[/threecol_two_last]
[/column]

[column]
[threecol_one]

DISRUPTIVE STRENGTH

[/threecol_one]
[threecol_one]

Directly after application

After 1 Hour

After 100 Hours

Comparative Values:

Air

Insulating oil

Glass

Porcelain

[/threecol_one]
[threecol_one_last]

163 kV/cm

208 kV/cm

256 kV/cm

 

33 kV/cm

120 kV/cm

140 kV/cm

200 kV/cm

[/threecol_one_last]
[/column]

[column]
[threecol_one]

SURFACE RESISTANCE

[/threecol_one]
[threecol_two_last]

28.46 TΩ (1 TΩ = 10ÅÇ Ohm) according to ISO93

[/threecol_two_last]
[/column]

[column]
[threecol_one]

CREEP RESISTANCE

[/threecol_one]
[threecol_two_last]

Very high creep resistance due to extremely high surface resistance.

[/threecol_two_last]
[/column]

[column]
[threecol_one]

WATER DISPLACEMENT

[/threecol_one]
[threecol_two_last]

100% in 10 seconds.

[/threecol_two_last]
[/column]

[column][threecol_one]

CORROSION PROTECTION

[/threecol_one]

[threecol_two_last]

Salt spray test according to DIN 50021 (5 cycles @ 24 hours): no traces of corrosion.

[/threecol_two_last][/column]

[column][threecol_one]

SAFETY MEASURES

[/threecol_one][threecol_two_last]

When processing, the instructions and safety precautions on the container label as well as the respective safety regulations to comply with the relevant employers’ mutual insurance association have to be regarded. For more information see material safety data sheet.

[/threecol_two_last][/column]
[column][threecol_one]

STORAGE

[/threecol_one][threecol_two_last]

In closed original containers the product may be stored at +5 to +25°C for 12 months.

[/threecol_two_last][/column]
[column][threecol_one]

DISPOSAL

[/threecol_one][threecol_two_last]

Completely emptied containers may be disposed as domestic waste. Not completely emptied containers have to be disposed according to local regulations. For further information refer to material safety data sheet.

[/threecol_two_last][/column]

IMPORTANT NOTE

This technical information has been compiled based on the latest state of technology and our experience. Due to the diversity of individual substrates and project conditions, however, the user is not relieved of its obligation to test our materials in a professional manner as their own responsibility for the suitability for the intended purpose under the prevailing conditions. Since application and handling are beyond our control, no liability of the manufacturer can be derived from the content of this technical information sheet. In all cases our terms and conditions are valid. In the case of a new issue this document will be invalid.

[/tab]
[tab title=”Material Safety Data Sheet”]

[wpdm_file id=2]

[/tab]
[/tabs]

 

 

Nano Tech